OA-EDGE T

OA-EDGE T

The OPTEX OA-EDGE T has been developed to increase the safety of automatic swing doors. The OA-EDGE T is based on OPTEX Active Infrared triangulation technology. Due to its modular design, you can upgrade the safety level of the sensor by adding additional modules. The OA-EDGE T. Complies with the latest European regulation EN 16005 and has been tested and approved by the German test organization TUV.

Compare

Features

Easy Installation, The sensor is easy to install by simply clicking the master and slave modules into the profile. The master and slave modules are connected by a communication cable with connector.
Slim Design, The sensor has a very slim design to ensure it will fit on many different types of swing door. The sensor is available in a black profile complete with a black lens.
safety, The wide detection area of each module ensures a high level of safety around the door and will prevent the door leaf from hitting an object or person near the door.
Module, The sensor can be assembled using master and slave modules according to the required safety level and the width of the swing door.
Quick Adjustment, Adjustments to the sensor are made using dipswitches and a levelling screw. Once the sensor is set up, an easy push on the function switch will launch the initialization and learning cycle. After installation, the sensor status can be easily checked on the visible LED.

Detection Area

Detection area at 2200 mm (7′ 2 5/8″) : Depth 140 (5 1/2″) x Width 870 (2’10”)
Test conditions required by EN 16005
Detection object: EN 16005 CA reference body
Emitting area at 2200 mm (7′ 2 5/8″) : Depth 140 (5 1/2″) x Width 440 (1′ 5 1/2″)

Model	OA-EDGE T
Color	Black
Mounting Height (*1)	1.5 to 3.0m (4'11'' to 9'10'')
Detection Area	See Detection area
Detection Method	Triangulation
Min. Configuration	1 master module +1 LED module
Max. Configuration	4 sensor modules +2 LED modules
Depth Angle Adjustment	0° to +25°
Power Supply	12 to 24VAC ±10% (50 / 60Hz) 12 to 30VDC ±10%
Power Consumption	< 1.3W (< 2VA at AC) at Min. configuration < 3.5W (< 4.5VA at AC) at Max. configuration
Test Input	Opto coupler 10 to 30VDC Current / 6mA Max.
Safety / Test Output 1	Form C Relay
Safety / Test Output 2	Voltage / 42VDC Current / 0.3A Max (Resistance load)
Noise Level	< 70dBA
Output Hold Time	Approx. 0.5sec.
Response Time	Response Time
Operating Temperature	-20°C to +55°C (-4°F to 131°F)
Operating Humidity	< 80%
IP Rate	IP54